To Next PageTo Next Page
Need help?Do you have a question about the Trane GAM5A0C42M31SAA and is the answer not in the manual?
General| Model Number | GAM5A0C42M31SAA |
|---|---|
| Category | Air Handlers |
| Nominal Heating Capacity | 42, 000 BTU/H |
| Voltage | 208/230V |
| Phase | 1 |
| Maximum Overcurrent Protection | 30 A |
| Nominal CFM | 1400 CFM |
| Refrigerant | R-410A |
| Nominal Cooling Capacity | 42, 000 BTU |
| Motor Type | ECM |
| Cabinet Type | Upflow |
Covers critical warnings regarding electrical hazards, vapors, sharp edges, and corrosion risks.
Details permissible locations for cabinet penetrations and rules against unauthorized puncturing.
Details initial unit preparation steps including damage checks, transport orientation, and pressure verification.
Provides essential considerations and guidelines for connecting supply and return air ducts to the unit.
Provides step-by-step instructions for brazing the refrigerant lines to the indoor coil connections.
Guides the installer through the low voltage wiring connections and hook-up procedures.
Provides tables for system charge adjustments based on indoor and outdoor unit model combinations.
Details the steps for starting up the system, including power application and thermostat settings.
Explains the sequence of operation for different modes like continuous fan, heat pump, cooling, and electric heat.
Outlines the overall operational and checkout procedures recommended after installation.
Provides a checklist of specific items to verify for proper system installation and performance.
