Trane IntelliPak Signature Series Programming Guide

30
Programming
PKG-SVP01B-EN
(On units with an airside economizer and comparative enthalpy only)
Active Outside Air Humidity 30 %
ECEM Return Air Humidity 62 %
Possible Values: 0-100%
1. Pressing the NEXT key will display the following screen.
(On units with a VCM)
VCM Outside Air Flow Input 350.0 CCFM
Possible Values: 0 to max unit airflow.
1. Pressing the NEXT key will display the following screen.
(On units with a VCM installed and CO2 reset enabled)
VCM CO2 Level Input 1512 PPM
Possible Values: 0-2000 PPM
1. Pressing the NEXT key will display the following screen.
(On water-cooled units with a water flow switch installed)
WSM Water Flow Switch Input Flow
Possible Values: Flow, No Flow
1. Pressing the NEXT key will display the following screen.
End of Submenu (NEXT) to Enter SETUP
1. Pressing the NEXT key will display the following screen.
(On units with GBAS module)
GBAS 0 - 5VDC Module Status Submenu
Press ENTER to View Data in This Submenu
1. Pressing the NEXT key will display the following screen.
STATUS

Trane IntelliPak Signature Series Specifications

General

Brand	Trane
Model	IntelliPak Signature Series
Category	Air Conditioner
Language	English