Trane IntelliPak Signature Series Programming Guide

PKG-SVP01B-EN
69
Programming SERVICE MODE
(On air-cooled units, 40-60 Tons)
Condenser Fan Outputs
1A OFF 1B OFF 2A OFF 2B OFF
Factory Presets: Off
Possible Values: On, Off, Auto
1. Press the NEXT key to advance the cursor to the next field within this screen.
2. Press the NEXT key again to display the following screen.
(On air-cooled units)
Condenser Fan Speed
Ckt 1 0%
Factory Presets: 0%
Possible Values: 0-100%, Auto
1. Press the NEXT key again to display the following screen.
(On air-cooled units)
Condenser Fan Speed
Ckt 1 0% Ckt 2 0%
Factory Presets: 0%
Possible Values: 0-100%, Auto
1. Press the NEXT key to advance the cursor to the next field within this screen.
2. Press the NEXT key again to display the following screen.
Compressor Relays:
K11 OFF K3 OFF K12 OFF K4 OFF
Factory Presets: Off
Possible Values: On, Off
1. Press the NEXT key to advance the cursor to the next field within this screen.
2. Press the NEXT key again to display the following screen.
(On units with hydronic heat)
Hydronic Heat
Actuator 0 %
Factory Presets: 0%
Possible Values: 0-100%, Auto
1. Press the NEXT key again to display the following screen.

Trane IntelliPak Signature Series Specifications

General

Brand	Trane
Model	IntelliPak Signature Series
Category	Air Conditioner
Language	English