To Next PageTo Next PageWhy is my Trane Control Unit cycling too fast?
If your Trane Control Unit is cycling too fast or too slow, check the location of the Control for drafts; seal air leaks behind the Control, relocate it, or apply a remote indoor temperature sensor. Additionally, cycles per hour or aggressive recovery might be improperly set; adjust these features in the advanced installer setup.
Why is my Trane TCONT850 Control Unit fan set to ON but not running?
If your Trane Control Unit fan is set to ON but not running, humidity control might be engaged. If indoor humidity is higher than the desired setpoint, the blower will cycle off with the equipment. A humidity icon will be displayed on the Fan Mode button when the blower operation is being inhibited due to high humidity. The blower motor may not be functioning.
How to calibrate the humidity display on my Trane TCONT850?
If the indoor humidity display is incorrect on your Trane Control Unit, calibrate the humidity sensor from the Control menu.
General| Brand | Trane |
|---|---|
| Model | TCONT850 |
| Category | Control Unit |
| Language | English |
Guidelines for selecting the optimal placement for the thermostat unit.
Details on connecting the thermostat to the internet via wired or wireless.
Step-by-step instructions for physically mounting the thermostat.
Instructions for connecting the control wires to the sub-base.
Visual guides illustrating wiring configurations for various system types.
Overview of screens for configuring equipment and settings.
Configuration options for outdoor/indoor unit types and stages.
Settings related to compressor and indoor heat cycles per hour.
Configuration for indoor and outdoor temperature/humidity sensors.
Settings to restrict system operation based on outdoor temperature.
Explains the Proportional-Integral control scheme for comfort and efficiency.
Explains the available system operating modes like Heat, Cool, Auto, Off, Emergency Heat.
Tools for testing individual system components like blower, compressor, and heat.
Accessing and interpreting system alerts and status.
Provides a consolidated view of real-time system operational data.
Details on viewing and understanding current and historical system alerts.
