ARTC-SVX007A-EN
31
Table 9. HMI settings menu screens (continued)
Screen User Interface Function Access
Companion IO
Configuration
1. The control system is comprised of
a dual controller configuration:
a. T3C – larger controller.
Handles compressors
and staging.
b. Companion – small
controller. Handles
refrigeration circuits –
EXVs, Fans, etc. and
pumps. This entails more
IO then is available on the
small controller and
therefore, some functions
are sent to the T3C
controller to process.
c. This screen provides this
transfer of control from
Companion to the T3C for
Digital and Analog
outputs.
Main Menu > Settings Menu > HMI >
Companion to T3C IO
Admin
Parameters
1. Project and Software information.
2. Main Switch Control.
3. Reboot HMI.
4. Reset Power Consumption
accumulation.
5. Reconnect off-line compressors.
Settings > HMI > Admin Parameters
Admin access only.
BMS Interface
Display output Building Management
System.
Note: This page validates the
communication between Chiller
and the ArcticCool BMS gateway
(FieldServer).
Main Menu > Settings Menu > BMS
Operating Procedures
To Next Page
Loading...
