VAV-SVX01C-EN 29
Wireless Zone Sensor
Disassociation
The receiver removes all stored association information, conducts a channel scan, and restarts
itself, if any of the following are true:
• The receiver address is changed from its current setting (001-999)
• The receiver receives a disassociation notification from its associated sensor
• The receiver does not receive a communication from its associated sensor within 35 minutes
Figure 14. Testing signal and battery strength
Signal strength
(Test
button)
SENSOR
LED1
LED2
LED3
S5
LED5
Push S5 firmly, then release
To Next Page
Loading...
