59
Pub. No. 22-5128-02
69-1216
3. Press Increase ▲ or Decrease ▼
until the desired temperature setpoint
displays.
By pressing Increase ▲ or Decrease ▼ after pressing
the cooling temperature. Example display shows Coo
NOTICE: This equipment is a Class B digital apparatus, which complies with Canadian Radio Interference
Regulations, CRC c. 1374.
CAUTION
Equipment Damage Hazard.
Can cause permanent damage to the compressor or other equipment.
To avoid possible equipment damage, do not operate cooling when outside temperature is below 50°F
(10°C). See equipment manufacturer instructions. To avoid possible compressor damage, allow the
compressor to remain off for five minutes before restarting.
M17075
Cool
Setting
To Next Page
Loading...
