Transcell Technology TI-500 - Introduction; Fcc Note

1
INTRODUCTION
The TI -500 Digital Indicator is a general purpose, industrial grade weight indicator. One model is currently
available, characterized by display type, enclosure type and power supply. Table 1 shows the TI-500
product details .
This model can readout up to 50,000 display divisions and can supply enough current for up to 4- 350
load cells. All setup parameters may be entered via the front panel keys, including calibr a tion.
If your Model TI -500 Digital Indicator is part of a complete floor scale or has already been installed for
you, you may skip to the operating instructions. Prior to using the indicator, please read this chapter
carefully and completely. Store the manual in a safe and convenient place so it will be available if you
have questions concerning the oper a tion of the scale.
MODEL
DISPLAY
TYPE
ENCLOSURE
TYPE
PO WER SOURCE
TI - 500 LCD Mild Steel/
ABS
AC adapter - 6 VDC, 3 00 mA or
4- AA batteries
TABLE 1: TI -500 Product Matrix
FCC NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equi pment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions manual, may cause harmful interference to radio com munications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to corre ct the interference at his/her own ex pense.