Transcell Technology TI-1680 - User Manual

i
TI-1680
DIGITAL WEIGHT INDICATOR
Setup / Operation Manual
Revision 1.31 975 Deerfield Parkway Buffalo Grove, IL 60089
March 22, 2013 Tel (847) 419-9180 Fax (847) 419-1515
http://
www.transcell.
com

Transcell Technology TI-1680 Specifications

General

Power Supply	12V DC
Operating Temperature	0°C to 50°C
Touchscreen	Resistive
Communication Ports	USB
Interface	USB

Summary

Introduction and Installation

Installation and Preparation

Guidance on preparing and installing the indicator in a suitable environment, including electrical power.

Connections

Connecting Weigh Platform

Instructions for connecting the load cell cable to the main board.

Connecting Serial I;O (COM1)

Connecting Control I;O

Connecting Power and Analog Output

Configuration

Menu Access and Overview

Describes configuration menus and how to access them.

Menu Structure Navigation

Setup Menu Descriptions

Setup Menu Procedures

User Menu Descriptions

User Menu Procedures

Batch Menu Descriptions

Batch Menu Procedures

Calibration Overview

Zero Calibration (F16)

Span Calibration (F17)

Operation and Display

Keyboard Functions

General Scale Operation

Weighing an Item

Tare Weight and ID Entry

Programming Set Points

Programming Over;Under Values

Advanced Scale Operation

Application (F30) Summary

Standard Outputs and Applications

Checkweighing and Batching Applications (F30)

Truck Weigh In;Out Application (F30 = 8)

Truck Operation Modes

Legal for Trade Sealing

Appendix A: Specifications

Appendix A: Interface and Power Specs

Appendix B: Serial Port Information

Serial Port Modes

Appendix C: Displayed Error Codes

Appendix D: Wiring External Output Relays

Appendix E: Analog Output Option

Analog Output Configuration

Passive 4-20 mA Analog Output Connection

Active 0-5 V Analog Output Connection