Transition Networks PointSystem CPSMC1900-100 - Technical Specifications; Power Input and Output; Laser Safety Precautions

34
CPSMC19xx-100 PointSystem ™ Chassis
24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Technical Specifications
For use with Transition Networks Model CPSMC19xx-100 or equivalent.
Dimensions 17 x 14.3 x 3.5 inches (430 x 363 x 89 mm)
Weight 17.5 lbs. (8.0 kg)
MTBF (Mean Time Before Failure) MIL217F2 V5.0 (hrs) Bellcore7 V5.0 (hrs)
CPSMC1900 + CPSMP-200 79,071 206,816
CPSMC1900 + CPSMP-210 201,643 479,742
CPSMP-200
Power Input: 100-240 V, 50/60 Hz, 0.62 - 1.5 Amp (typical with a fully-loaded chassis)
Power Output: +12 VDC at 10.83 Amp maximum.
CPSMP-210
Power Input: 48-VDC (38 - 58 VDC) @ 4.0 Amp (typical with a fully-loaded chassis)
Power Output: +12 VDC at 12.5 Amp maximum.
Environment
Tmra*: 0 to 50°C (32 to 122°F) (*Manufacturer’s rated ambient temperature)
0 to 60°C (32 to 140°F) (when redundant power or fan module is used)
Storage Temperature: -40 to 80°C (-40 to 176°F)
Humidity 5 to 95%, non condensing
Altitude 0 to 10,000 feet
Compliance EN 55022:1998+A1:2000 Class A; EN 55024:1998; UL Listed;
FCC Part 15 Subpart B; CE Mark; 21 CFR Subpart J
Warranty Lifetime
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J applicable at the date
of manufacture.
The fiber optic transmitters on this device meets Class I Laser safety requirements per IEC-825/CDRH standards
and complies with 21 CFR1040.10 and 21CFR1040.11.
CAUTION: Visible and Invisible Laser Radiation When Open. Do Not Stare Into Beam Or View Directly
With Optical Instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other than those specified herein
may result in hazardous radiation exposure.