EasyManua.ls Logo

Transition Networks PointSystem CPSMC1900-100 - Troubleshooting; Power LED and Fan Status Issues; Management Module Power LED Issues; Other Module Power LED Issues

Transition Networks PointSystem CPSMC1900-100
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
CPSMC19xx-100 PointSystem
Chassis
troubleshooting
6 Troubleshooting
1. Are any of the power LEDs on any of the slide-in-modules illuminated, AND are
the fans operating?
YES
The chassis is receiving power. Proceed to the next step.
NO
Check all power supply cables for proper connection.
For AC power: Ensure the AC receptacle on the wall is supplying power.
If the fuse for the AC receptacle on the wall blows repeatedly, have the AC
receptacle inspected by a qualified electrician.
For DC power: Ensure the DC power supply is supplying power.
Check the fans to see if they are operating.
Contact Technical Support: U.S./Canada: 1-800-260-1312, International:
00-1-952-941-7600.
2. For the management modules (CPSMM-120, CPSMM-200, CPSMM-210), are
ANY of the power LEDs NOT illuminated?
NO
All management modules are receiving power. Proceed to the next step.
YES
For those management modules where the power LED is NOT illuminated:
Ensure the management module is firmly seated in the slot.
Press the RESET button on the management module.
Contact Technical Support: U.S./Canada: 1-800-260-1312, International:
00-1-952-941-7600.
3. For the remaining slide-in-modules, are ANY of the power LEDs NOT illuminat-
ed?
NO
All slide-in-modules are receiving power. Proceed to the next step.
YES
For those slide-in-modules where the power LED is NOT illuminated:
Ensure the slide-in-module is firmly seated in the slot.
Contact Technical Support: U.S./Canada: 1-800-260-1312, International:
00-1-952-941-7600.
4. To determine if a fault is due to a software problem, consult the troubleshoot-
ing section of the FocalPoint™ 2.0 Management Application and CPSMM100
Firmware User’s Guide (P/N 33293). This manual is available on the enclosed
application CD and on-line at www.transition.com.
5. To determine if a fault is due to an individual management module or slide-in-
module, consult the troubleshooting section of the user’s guide for that particu-
lar module.
6. If none of the solutions listed in this section resolves the problem, contact
Technical Support: U.S./Canada: 1-800-260-1312, International: 00-1-952-
941-7600.
24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600