MEASUREMENTMEASUREMENT
1.
Adjust the zero. LCD display
Inflating and measuring.
Start the Measurement
When the monitor is off, press START/STOP button to turn on the monitor, the user
ID will blink ,
confirm the User ID, then press “START/STOP” button again and it will
finish the whole measurement.
(Take user A for example.)
Display and save the
measurement result.
1.With TMB-1776-B successfully pair-up with your mobile
device, the measurement data will be automatically
transmitted to your mobile device via Bluetooth.
2.The symbol will disappear after successful data
transmission, and you may check your personal health
data stored in your mobile device.
3.If the data transmission fails, the symbol will remain.
The pending measurement data will be transmitted to
your mobile device when next measurement is complete.
CAUTION
If the data transmission fails, the Bluetooth
symbol blinks all the time until it turns off.
If the data transmission succeeds, the Bluetooth
symbol will not blink and then turn off.
15
14
To Next Page
Loading...
Need help?
General
