Installing an MP—Models MP-341 and MP-352
Chapter 3
Trapeze Mobility Point Installation Guide
Version 3.0
46
Confidential—Beta1 Draft—Confidential—Beta1 Draft—20 Sep 04
3 Unlock the universal mounting bracket from the MP access point by inserting
the 3-mm or 1/8-inch screwdriver into the Unlock hole on the MP access point
as shown in Figure 29.
Figure 29. Step 3—Unlocking the Bracket
4 Remove the bracket as shown in Figure 30.
Figure 30. Step 4—Removing the Bracket
Caution! To avoid damage to the MP access point’s lock mechanism
or electronic components, do not use excessive force when inserting a
tool into the Unlock or Lock hole.
840-9502-0011
840-9502-0008
To Next Page
