treesse Phantom PR1 - Overflow Edge System; Drain and Suction Pumps

14
EN
minipool Phantom PR1
OVERFLOW EDGE
The overow edge of the minipool collects excess water
and conveys it to the collection tanks under the bathtub.
The water level is always constant, allowing for relaxation
and a total wellness experience.
The water that overows is recovered, ltered and au-
tomatically recirculated within the minipool through the
intake grille.
The minipool works exclusively when the bathtub
and tanks are full of water.
The edge is designed to recover the overowing
water, not for abnormal movements caused by an
improper use of the minipool (e.g., diving).
In this regard we strongly recommend entering the bath-
tub and getting in the water slowly.
When the recirculation of the water overow is active,
the heater automatically activates to manage the water
temperature.
OK
NO
Use
OPTIONAL
CHROMATHERAPY
The LED light moves the hydromassage in the pool.
Phantom PR1
_standard in the upper hydromassage slots.
- optional in the lower hydromassage slots.
For this operation see page 17.
DRAIN AND SUCTION PUMPS
The minipool drain is positioned on the bottom, hidden
by the nishing plate.
This solution makes the use of the bathtub safer and
more comfortable.
To clean the drainage grate, just manually remove the
nishing plate since it is simply resting on the bottom.
For this operation see page 18.