EasyManua.ls Logo

treesse Phantom PR1 - Page 28

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
EN
minipool Phantom SP1
OVERFLOW EDGE
The overow edge of the minipool collects excess water
and conveys it to the collection tanks under the bathtub.
The water level is always constant, allowing for relaxation
and a total wellness experience.
The water that overows is recovered, ltered and au-
tomatically recirculated within the minipool through the
intake grille.
The minipool works exclusively when the bathtub
and tanks are full of water.
The edge is designed to recover the overowing
water, not for abnormal movements caused by an
improper use of the minipool (e.g., diving).
In this regard we strongly recommend entering the bath-
tub and getting in the water slowly.
When the recirculation of the water overow is active,
the heater automatically activates to manage the water
temperature.
CHROMATHERAPY
The light “magically” moves the whirlpool in the bathtub.
Chromatherapy is optional on both the overow edge
and on the two perimeter slots.
For the operation see page 30.
DRAIN AND SUCTION PUMPS
The minipool drain is positioned on the bottom, hidden
by the nishing plate.
This solution makes the use of the bathtub safer and
more comfortable.
To clean the drainage grate, just manually remove the
nishing plate since it is simply resting on the bottom.
For the operation see page 34.
Use
OK
NO
OPTIONAL
OPTIONAL

Other manuals for treesse Phantom PR1

Related product manuals