50
EN
PROBLEM POSSIBLE CAUSE SOLUTION
Unstable pH value A very unstable pH could be caused
by a bad balance of total alkalinity
(Complete Alkalimetric Titre - CAT).
Refer to the chapters:
1
page37
Irritation of eyes, mucous membranes
and skin
• Water with unbalanced values
(hardness, pH, alkalinity).
• Water with disinfectant treatments
that are too aggressive or too
concentrated.
Refer to the chapters:
1
page37
2
page41
The whirlpool pumps and the blower
start by themselves
The minipool has an automatic
mixing function that in sequence
activates the various whirlpool pumps
and the blower to mix the water in
the bathtub. This provides for a more
effective ltering action.
See chapter "“MODO SILENCE”"
on page 19 to prevent recircula-
tion in some hours of the day (e.g.,
during the night).
Maintenance
minipool Phantom
To Next Page
Loading...
