E.13
Set Day and Date
1. Press <Set> to scroll to DAY/DT.
2. Hold <Set> until SET DT displays, replaced
by a two digit display, with a digit ashing.
3. Press <Mode> to scroll the number menu.
4. Press <Set> to select a number and
advance to the next digit.
5. Repeat #3 and 4. SET MTH displays, and the
Month menu appears.
6. Repeat #3 and 4 for to select a month. SET
YR displays, replaced with a four-digit number with a
digit ashing.
7. Repeat #3 and #4 for both digits.
After selection is made with <Set>, DONE displays, then the
computer returns to normal operation.
Set Time or Set Alarm-
1. Press <Set> to scroll to TIME.
2. Hold <Set> until SET TME displays. Press
<Mode> to scroll to SET TME or SET ALM.
3. Press <Set> to choose. SET HR displays,
then shows 2 digits with one ashing.
4. Press <Mode> to scroll the number menu.
5. Press <Set> to select a number and
advance to the next digit.
6. Repeat #4 and #5 to set each digit of
To Next Page
Loading...
