place with your thumb or ngers.
6. Follow the instructions on page 14 to
ReStart after installing a battery.
First Use- after ReStart or Battery Install
1. ENG displays. Press <Mode> to scroll the
language options.
2. Press <Set> to select. SET WHL displays,
then a wheel size.
3. Press <Mode> to scroll wheel sizes.
4. Press <Set> to select wheel size see page 11 for
Custom option). SET M/KM dispays, followed by MI.
5. Press <Mode> to scroll between MI and KM.
6. Press <Set> to choose.
After selection is made with <Set>, DONE displays, then the
computer returns to normal operation.
Set Custom Wheel Size (optional)
Determine the actual Wheel Size
A rollout test determines the actual wheel circumference for
computer calibration. Perform the
roll-out test on a hard, at surface such
as a garage or basement oor.
Make sure the tires are properly
inated. For the highest level of
accuracy, the rider should be on the
bike during roll-out.
1. Position the bike so
that the front wheel valve
To Next Page
Loading...
