EasyManuals Logo

TRENDnet TEW-721BRM User Manual

TRENDnet TEW-721BRM
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
© Copyright 2014 TRENDnet. All Rights Reserved.
TEW-721BRM
29
Note: You will need to access your router management page using your new router
IP address to access the router management page. (e.g. Instead of using the default
http://192.168.10.1 using your new router IP address will use the following format
using your new router IP address http://(new.router.ipaddress.here) to access your
router management page.
Subnet Mask: Click the Subnet Mask drop-down list to select a mask. (e.g.
255.255.255.0)
Local Domain Name: Enter the domain name to assign your router.
DNS Relay: Select enable to activate DNS relay
Note: The DHCP address range will change automatically to your new router IP
address settings so you do not have to change the DHCP address range manually to
match your new router IP address settings.
Set up the DHCP server on your router
Setup > Local Network
Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to
automatically assign an IP address to each computer or device on your network. The
DHCP server is enabled by default on your router. If you already have a DHCP server on
your network, or if you do not want to use your router as a DHCP server, you can
disable this setting. It is recommended to leave this setting enabled.
1. Log into your router management page (see “Access your router management page
on page 22).
2. Click on Setup, and click on Local Network.
3. Review the DHCP Server settings.
DHCP Option: Select the DHCP mode of your modem router. If you set the DHCP
Option to DHCP Server, configure the following settings:
Note: If you set your modem router as the DHCP server, your modem router will
automatically assign an IP address to each computer on your network. By default,
the fields for DHCP settings have predefined values. It is recommended to retain
these values unless specified by your ISP.
IP Pool Starting Address: Enter the lowest range of IP address to assign. The
default value is 192.168.10.101.
IP Pool Ending Address: Enter the highest range of IP address to assign. The default
value is 192.168.10.200.
Subnet Mask: Enter the subnet mask. The default value is 255.255.255.0.
Router IP Address: Enter the IP address of your modem router. The default value is
192.168.10.1.
Primary DNS Servers / Secondary DNS Servers: Enter a primary and a secondary
DNS server if the DNS Relay option is enabled.
Lease Time: Enter the lease time in seconds. The lease time is the amount of time a
device is allowed connection to your modem router using its current dynamic IP
address. At the end of the lease time, the lease is either renewed or a new IP
address is assigned. The default value is 86400 seconds (1 day).

Table of Contents

Other manuals for TRENDnet TEW-721BRM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEW-721BRM and is the answer not in the manual?

TRENDnet TEW-721BRM Specifications

General IconGeneral
BrandTRENDnet
ModelTEW-721BRM
CategoryNetwork Router
LanguageEnglish

Related product manuals