1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Access Management.
3. Click Add to a rule and Apply to save settings,
Packet Layer
Interface: Select the interface.
Status: Select whether to enable or disable remote access of the device.
Remote IP: Enter the IP address of the remote device.
Remote IP Mask: Enter the IP mask of the remote device.
Note: To allow or deny all devices to remotely access your modem router, enter “*”
on the Remote IP and Remote
Service: Select the type of remote management service that the device can or
cannot access.
Rule Action: Select whether to enable or disable the access rule.
Application Layer
User Name: Select the user name who can access the control rule.
Interface: Select the interface.
Match Type: Select the control rule type.
Match Condition: Select the control rule condition.
Host IP/Mask: Enter the IP address and IP mask of the remote device.
Service: Select the type of remote management service that the device can or
cannot access.
Rule Action: Select whether to enable or disable the access rule.
Configure the router’s Ethernet port settings
Advanced > Ethernet Settings
This page allows you to set the link mode and enable flow control for each of the four
LAN ports of your modem router.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on Ethernet Settings.
3. Select the Interface you want to configure. Check Enable to actiave interface.
4. On the LinkMode pull down menu select the link speed to apply and check FlowCtrl
to enable flow control.
5. Click Apply to save settings.
Open a device on your network to the Internet
This router can provide access to devices on your local area network to the Internet
using the Virtual Server, Special Application, method (DMZ NOT recommended).
DMZ
Advanced > Firewall > DMZ
You may want to expose a specific computer or device on your network to the Internet
to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature
To Next Page
Loading...
Need help?
General
