TRENDnet TEW-737HRE User Manual

TEW-737HRE User’s Guide
Appendix
© Copyright 2013 TRENDnet. All rights reserved. 15
Appendix
How to setup a stac IP address on your computer’s
network card
If your computer has mulple network cards installed, physical and
virtual, chances are you may experience diculty in connecng to
the TEW-737HRE without seng up your own IP address. This secon
will demonstrate how to setup an stac IP on your network card. It is
strongly recommended that you consult your computer or operang
system manufacturer directly for assistance on the proper procedure
for conguring network sengs.
Before setup, make sure you don’t have stac IP setup on other
network cards to avoid network address collision.
Windows 8
1� Open the Charms bar by moving the mouse to the top right corner
of the screen or press the Windows Key + C and click on Search.
2� Type “network” in the search box and click Sengs to focus your
search.
3. Choose Network and Sharing Center
4� Click Change adapter sengs on the le-hand side.

TRENDnet TEW-737HRE Specifications

Output Power

802.11b output power	20 dBm
802.11g output power	18 dBm
802.11n output power	20 dBm

Power

voltage	100 - 240 V AC
power consumption	6 Watts (Max)
operating temperature	0 - 40°C (32 – 104°F)

Weight and Dimensions

dimensions	67 x 56 x 45 mm (2.6 x 2.2 x 1.8 in.)
weight	120 g (4.2 oz)
operating humidity	Max. 95% non-condensing