TRENDnet TEW-737HRE User Manual

TEW-737HRE User’s Guide
Hardware Features
© Copyright 2013 TRENDnet. All rights reserved. 2
• Network Port — Connect a network cable (Ethernet cable) to your
computer for repeater conguraon.
• Reset Buon — Resets your repeater. Push and hold this buon
for 5 seconds with a pin or paper clip to reset conguraon to
factory default.
• On/O Switch — Switch the On/O buon to turn on or turn o
your repeater.
Network Port Reset Buon On/O Switch
WPS Buon
+
LED Indicator
Power Plug
Release Buon
Hardware Features
• WPS (Wi-Fi Protected Setup) Buon + LED Indicator — Push and
release the WPS buon to acvate WPS copying wireless sengs
from your router. The LED indicator will start blinking in green
when WPS pairing is acvated.
• Power Plug Release Buon — To exchange dierent style of
power plug. (This package comes with only one power plug.)

TRENDnet TEW-737HRE Specifications

Output Power

802.11b output power	20 dBm
802.11g output power	18 dBm
802.11n output power	20 dBm

Power

voltage	100 - 240 V AC
power consumption	6 Watts (Max)
operating temperature	0 - 40°C (32 – 104°F)

Weight and Dimensions

dimensions	67 x 56 x 45 mm (2.6 x 2.2 x 1.8 in.)
weight	120 g (4.2 oz)
operating humidity	Max. 95% non-condensing