1. Before You Start
Package Contents
?TPE-S80
?Multi-Language Quick Installation Guide
?Power cord
?Rackmount Kit
?Rubber Feet
System Requirements
1
?Computer with Network adapter installed
?RJ-45 Network Cable
?The surface must support at least 1.5 Kg for the Switch
?The power outlet should be within 1.82 meters (6 feet) of the Switch
?Make sure that there is proper heat dissipation from and adequate ventilation
around the Switch
?Do not place heavy objects on the Switch
?IEEE 802.3af Powered Device
?TPE-112S (Optional)
?EIA standard 19” rack (Optional)
Note: The TPE-S80 only supports Powered Devices that follow the
IEEE 802.3af standard
To Next Page
Loading...
