TRENDnet TPE-S80 - Technical Specifications of TPE-S80; Hardware, Ports, and Standards; Performance and Power Details; Environmental, Physical, and PoE Specs

7
Technical Specifications
Hardware
Standard
?IEEE 802.3 10Base-T
?IEEE802.3u 100Base-TX
?IEEE 802.3af Power over Ethernet
?IEEE 802.3x Flow Control
8 x 10/100Mbps Auto-MDIX PoE ports
On/Off power switch
?Ethernet: 10/20Mbps (half/full duplex)
?Fast Ethernet: 100/200Mbps (half/full duplex)
512Kbits
1K MAC entries
1.6Gbps
100~240VAC 50/60Hz, internal universal switching power
Power, Link/Activity, PoE Act/Status
?6 Watts max. (no Power Device (PD) connected)
?132 Watts max. (8 x 15.4 watts PoE devices connected)
?Operating: 0° ~ 45°C (32° ~ 113°F)
?Storage: -10° ~ 70°C (14° ~ 158°F)
Ports
Power Switch
Data Transfer Rates
Data RAM Buffer
Address Table
Switch Fabric
Power
Diagnostic LEDs
Power Consumption
Temperature
10%- 95% (non-condensing)
266 x 160 x 44 mm (10.5 x 6.3 x 1.73 in.)
1.4 kg (3.1 lb)
CE, FCC
?Up to 15.4 watts per port; PD classification
?Polymer switch for short protection
?PoE: pin 3,6 for power (+) and pin 1,2 for power (-)
Humidity
Dimensions
Certifications
Weight
PoE
Power over Ethernet