Need help?Do you have a question about the Triax TDH 800 and is the answer not in the manual?
General| Brand | Triax |
|---|---|
| Model | TDH 800 |
| Category | Control Unit |
| Language | English |
Guidance on connecting the unit to power and ensuring proper earthing.
Procedure to restore the headend unit's IP address to factory default.
Step-by-step guide for installing input modules into the headend unit.
Explanation of LED indicators for input module status and software updates.
Step-by-step guide for installing output modules into the headend unit.
Explanation of the four LEDs indicating system and tuner status.
Explains the need for a static IP address to access the Service Tool.
Steps to open and log in to the TDH Service Tool via a web browser.
Description of the main tabs used for configuring inputs, outputs, and system settings.
Guide for activating particular services using activation keys from Triax Sales.
Setting specific IP addresses, subnet mask, and default gateway for the headend.
Procedure to restart the headend system for changes to take effect.
Instructions for updating the headend firmware via the Triax website.
Accessing and understanding the Network tab in the TDH Service Tool.
To Next Page
