Trident 88 - User Manual

Explains controls for Mic Gain, Line Gain, and various signal routing switches.

Details the four-band EQ and High Pass Filter on the input channel.

Details the controls for Auxiliary Sends 1-8, including level, pan, and pre/post switching.

Covers the monitor section controls like Tilt EQ, Pan, Level, Mute, and Solo.

Explains the monitor section controls for group channels, including meters and source selection.

Describes the EFX EQ section with shelving EQ and the EQ IN switch.

Explains the Aux send controls (level, pan, pre/post) for the group section.

Details the Group EQ section with shelving EQ and related controls.

Details the Aux 1-8 master level controls and solo switches.

Details the Studio Playback controls, including source selection and level.

Details the monitor section controls like Dim, Monitor Level, Mute, Headphone Level, and Sum Mono.

Details the talkback system, oscillator, and routing options.

Details the switch-mode DC power supply, its connection, and front panel indicators.

Lists the DC power connections and their corresponding pinouts on the power supply.

Details the 'star grounding' method to eliminate hum loops and provides step-by-step instructions.

Illustrates the signal path and component flow within the input module.

Shows the signal flow and component connections for the input sub-group module.

Depicts the signal flow and component connections within the master module.

Details step-by-step procedures for cleaning faders using compressed air and contact cleaner.

Explains the proper method and precautions for lubricating faders.

Outlines the warranty periods, coverage, and registration requirements for the Trident 88.