TY96/97 VHF Radio Installation Manual 29 July 2016
01238-00 Issue AD
______________________
Page 6 Trig Avionics Limited
4.4 Required Items
Additional items you will require, but which are not in the TY96/TY97 package, include:
Antenna and fixing hardware. The TY96 or TY97 are compatible with any standard 50 ohm
vertically polarised antenna with a VSWR better than 2.5:1.
Cables. You need to supply and fabricate all required cables. Guidance on cable types is
given in section 5.
Fixings. To secure the VHF radio tray to the airframe you will need at least 6 flat head screws
and self-locking nuts. If the aircraft does not have existing mounting provisions you may need
to fabricate additional brackets to support the VHF radio tray.
To Next Page
Loading...
