Trina Solar DE21 - Page 8

Trina Solar User Manual | Vertex Series Modules
5
Please choose a flat and solid ground to place the module package after transportation to the
installation site.
Forklift operation in warehouse
When using a forklift to unload the modules, please choose a forklift with suitable tonnage according
to module weight. The forks should go into the pallet at least 3/4 of the pallet depth during unloading
(the forks length L ≥ 3/4 of pallet length).
In order to ensure better stability during forklift transport, the forks distance (W) should be adjusted
to the maximum position without any interference.
Please drive slowly and do not allow forks to hit the cartons or pallets. Please place buffer protection
material (in yellow, preferably silicone, rubber, EPE) in advance to prevent the inside modules being
damaged due to the external force.
It is recommended to extend the height or width of the forklift backrest to prevent directing touch
with the module glass.
Please also pay attention to the following precautions when unloading (taking vertical portrait
packages as an example).
Recommend to secure the module
package to the forklift with a safety
rope, transport horizontally with no
person standing on either side.
Prevent collision on the
top when unloading from
the container.
No tilting storage.
No collision on the module glass.
Control the speed to prevent
tipping.