10
17. Security (Settings)
The Security Settings Screen allows the Administrator to modify settings
such as Account Blocking, Password Policy and Idle Timeout.
From the Security section click Setting, the Security Settings Screen
appears, see the fi gure below.
Account Blocking: This allows the administrator to adjust the settings
that cause a user to be blocked from access after entering an incorrect
username and/or password. The administrator can select how many
attempts the user gets to enter the correct information, the time frame
within which those attempts must be made and how long the user is
forbidden access after failing to enter the correct information in the given
time period.
Password Policy: You have the option of a standard or high security level
password. The table below shows the parameters of the 2 options.
Note: The following “special” characters: & < > ” { } cannot be used in either the user name or password. Check the box to enable the high security
password policy. Unchecked, the standard security policy applies.
Idle Timeout: Select the Timeout inactivity period after which the user is disconnected from the system. Choose No Timeout to disable Timeout. During
a Timeout, a user will not be able to make changes in the Web Confi guration Interface, nor will they be able to move throughout the Interface’s pages
without re-entering their username and password.
Click Save & Restart to save any confi guration changes done to the Security Settings page. The NetCommander IP system restarts with the new changes.
Standard Security Policy High Security Policy
6 characters or more. Cannot
include the user name.
8 characters or more must include at least 1 digit
and 1 upper case letter and 1 “special” character as
follows ! @ # $ % ^ * ( ) _ - + = [ ] ’ : ; ? / . Cannot
include the username.
18. Security (SSL Certifi cate)
This page gives you the option to install your own SSL certifi cate. Follow
the steps below to install the new certifi cate.
From the menu, select SSL Certifi cte, the install SSL Certifi cate page
appears, see the fi gure below.
Certifi cate File: Browse to locate the Certifi cate fi le.
Private File: Browse to locate the Private Key fi le.
Key Password: Type the Key password.
Click Save & Restart.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
