To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SmartPro and is the answer not in the manual?
General| Waveform | Sine |
|---|---|
| Efficiency | 95 % |
| Output power | 300 W |
| UPS topology | Line-Interactive |
| Input frequency | - Hz |
| Country of origin | China |
| Surge energy rating | 480 J |
| Output power capacity | 0.5 kVA |
| Emergency Power Off (EPO) | Yes |
| Input operation voltage (min) | 230 V |
| Output operation voltage (max) | 240 V |
| Output operation voltage (min) | 220 V |
| Battery recharge time | 4 h |
| Typical backup time at full load | 3.2 min |
| Typical backup time at half load | 14.6 min |
| Form factor | Rackmount |
| Certification | CE, GOST, SASO, IRAM |
| Product color | Black |
| Power plug | C14 coupler |
| AC outlet types | C13 coupler |
| AC outlets quantity | 8 AC outlet(s) |
| Serial ports quantity | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Storage temperature (T-T) | -15 - 50 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Sustainability certificates | RoHS |
| Master (outer) case width | 408.9 mm |
| Master (outer) case height | 254 mm |
| Master (outer) case length | 551.2 mm |
| Master (outer) case weight | 17460 g |
| Quantity per master (outer) case | 2 pc(s) |
| Master (outer) case GTIN (EAN/UPC) | 10037332119251 |
Weight and Dimensions| Depth | 286 mm |
|---|---|
| Width | 439.9 mm |
| Height | 43.9 mm |
| Weight | 7400 g |
| Package depth | 533.4 mm |
| Package width | 401.3 mm |
| Package height | 106.7 mm |
| Package weight | 8030 g |
Guidelines for safe UPS placement, including ventilation, temperature, and environmental considerations.
Precautions for connecting the UPS to power sources, emphasizing grounding and avoiding improper connections.
Advice on connecting equipment to the UPS, regarding life support and flammable environments.
Critical safety information regarding battery handling, disposal, and replacement procedures.
Instructions for mounting the UPS in 4-post and 2-post racks, covering hardware and procedures.
Procedure for mounting the UPS in an upright tower position using included hardware and accessories.
Connecting the UPS to a computer via USB or serial cable for software control and monitoring.
Connecting the EPO port to a facility's emergency power off circuit for emergency shutdown.
Instructions for connecting external battery packs to extend UPS runtime, including charge rate settings.
Describes the function and operation of the front panel buttons like ON/OFF/STANDBY and MUTE/TEST.
Explains the front panel indicator lights and their meanings for UPS status, load, and battery.
Details rear panel features including AC receptacles, communication ports, and EPO port.
Covers accessory slot, power sensitivity, external battery connector, charge level switches, breakers, and ground screw.
Guidelines for storing the UPS for extended periods, including battery recharge recommendations.
Steps for troubleshooting and returning the UPS for repair, including contacting Tripp Lite support.
