43
ARGO USER MANUAL
1. From the Main Menu, press 6 (Ter minal
Confi guration).
2. On the Terminal Confi guration menu, press 1
(General Parameters).
3. On the General Parameters menu, press 1
(Terminal ID).
ENTER TERMINAL ID
(Resolves error code 189.)
The terminal ID is provided by the host processor.
4. Enter the Terminal ID received from the Host
Processor. When entering alpha characters, use
the virtual keyboard.
NOTE: Ensure there is NO space before the
terminal ID.
5. When fi
nished entering the Terminal ID, press
ENTER.
6. Press ENTER again to set change.
Virtual Keyboard
If th e vi rt ua l
keyboard does
not display
automatically
for alphanumeric
entry, press the
F8 function key
to access.
To Next Page
Loading...
