44
Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This
product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you
fully understand the instructions. Ensure all users of the tool read and fully understand this manual.
As part of our ongoing product development, specifications of Triton
products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration
and use anti-vibration gloves. Do not operate the tool with hands below a
normal comfortable temperature, as vibration will have a greater effect. Use
the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use
for the tool in normal working conditions. A poorly maintained, incorrectly as-
sembled, or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in
the workplace that may be useful to domestic users who use tools for long
periods of time.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Read instruction manual
Wear hand protection
Class II construction
(double insulated for additional protection)
For indoors use only!
Caution!
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.
Description of Symbols
Model number: TSPS450
Voltage: 220-240V~, 50Hz 450W
No load speed: 2,000rpm
Oscillations: 58opm
Stroke length: 16mm
Sanding sleeve sizes: 13mm, 19mm, 26mm, 38mm,
51mm, 76mm dia
Dust port: 38mm
Dust adaptors: 32mm & 100mm
Table size: 370mm x 290mm
Spindle dimensions: 12.7mm x 1.5mm thread
Insulation:
Weight: 14.6 kg
Sound and vibration information
Sound pressure L
PA
: 76dB(A)
Sound power L
WA
: 89dB(A)
Uncertainty K: 3dB(A)
Specification
V Volts
~ Alternating current
A Ampere
n0 No load speed
Hz Hertz
W, kW Watt, kilowatt
/min or min
-1
(revolutions or reciprocation) per minute
Technical Abbreviations Key
643723_Z1MANPRO1_AUS.indd 4 24/02/2015 16:42
To Next Page
Loading...
Need help?
General
