EasyManuals Logo

Triton TSPS450 User Manual

Triton TSPS450
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
8
Storage
Store this tool carefully in a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are
no longer functional and are not viable for repair.
Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
Contact your local waste disposal authority for information on the correct way
to dispose of power tools
Problem Possible cause Solution
No function when On/Off Switch (1)
is operated
No power Check power supply
Defective On/Off Switch
Replace the On/Off Switch at an authorised Triton
service centre
Sanding Sleeve does not rotate with Rubber Drum Spindle Lock Nut not tight enough
Tighten Spindle Lock Nut in small increments until
the Rubber Drum secures the Sanding Sleeve
Large amounts of dust are being produced
Dust extractor passage is blocked
Turn off the machine at the mains. Remove the
Rubber Drum, Table Insert and the Spindle Washer.
Remove the blockage from the dust extractor
passage
Incorrect Table Insert used Change to the correct sized Table Insert
Corrosion is forming on the Table Top Moisture is causing the Table Top to corrode
Using a clean dry cloth, rub a thin film of
compatible protective lubrication over the clean
Table Top surface
Troubleshooting
643723_Z1MANPRO1_AUS.indd 8 24/02/2015 16:42

Other manuals for Triton TSPS450

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triton TSPS450 and is the answer not in the manual?

Triton TSPS450 Specifications

General IconGeneral
BrandTriton
ModelTSPS450
CategorySander
LanguageEnglish

Related product manuals