How do I fix 'Load MP Tray' message on Triumph Adler Printer?
If your Triumph Adler Printer shows 'Load MP Tray (A4)/(PLAIN)', there is no paper cassette installed in the printer that matches the paper size and paper type of the print job. Set paper in the MP tray and press [GO] to resume printing.
What to do if Triumph Adler P-3521DN says 'Missing developer unit'?
If your Triumph Adler Printer displays 'Missing developer unit', it means the developer unit is either not installed or incorrectly inserted. Insert the developer unit securely.
Why is my Triumph Adler P-3521DN emitting vapor?
If vapor is emitted near the top tray of your Triumph Adler Printer, the temperature may be low near the printer, or the paper being used has been exposed to humidity. Heat generated during printing can evaporate water moisture in the printed paper, emitting vapor. This does not necessarily indicate a problem, and printing can be continued. To correct this, increase the temperature in the room and use paper stored in a dry place.
What to do if Triumph Adler Printer says 'Cassette not loaded'?
If your Triumph Adler Printer displays 'Cassette # not loaded', the corresponding paper cassette is not installed. Install the cassette, where the cassette number can be 1 (topmost) to 4 (bottom).
What does 'Duplex disabled Press GO' mean on Triumph Adler Printer?
If your Triumph Adler Printer displays 'Duplex disabled Press GO', you attempted to print with a paper size and paper type that cannot be used for duplex printing. Press [GO] to print onto one side of the paper only. You can select an alternative paper size and type by pressing the ? or ?. You can also press [MENU] and change the tray setting inside the menu, which will automatically cancel the error and output resumes.
What does 'Memory overflow Press GO' mean on Triumph Adler Printer?
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Paper Capacity | 250 sheets |
| Maximum Paper Size | A4 |
| Connectivity | USB 2.0, Ethernet |
| Warm-up Time | 15 seconds |
| Multi-purpose Tray Capacity | 50 sheets |
| Processor Frequency | 800 MHz |
| Operating Systems Compatibility | Windows, Linux, macOS |
| Maximum Input Capacity | 800 sheets |
| Standard Output Capacity | 150 sheets |
| Maximum Output Capacity | 150 sheets |
| Paper Tray Media Types | Plain paper |
| Multi-purpose Tray Media Types | Plain paper, Envelopes, Labels |
Provides guidelines for choosing paper, covering condition, composition, sizes, smoothness, weight, and moisture.
Manages files on USB memory, including printing, copying, and removing the device.
Configures paper size, type, and custom settings, as well as print parameters like quality and feed modes.
Configures network protocols (TCP/IP v4/v6) and interface options for printer connectivity.
Manages settings for optional network interface kits (IB-50, IB-51) for enhanced connectivity.
To Next Page
