Triumph Bonneville Bobber 2018 User Manual

General Information
39
Ignition Key
Warning
Additional keys, key rings/chains or
items attached to the ignition key may
interfere with riding, leading to loss of
motorcycle control and an accident.
Remove all additional keys, key rings/
chains and items from the ignition key
before riding the motorcycle.
Caution
Additional keys, key rings/chains or
items attached to the ignition key may
cause damage to the motorcycle's
painted or polished components.
Remove all additional keys, key rings/
chains and items from the ignition key
before riding the motorcycle.
Caution
Do not store the spare key with the
motorcycle as this will reduce all
aspects of security.
1
cixj
1. Key number tag
The ignition key operates the ignition
switch and the steering lock.
When the motorcycle is delivered from
the factory, two ignition keys are
supplied together with a small tag
bearing the key number. Make a note of
the key number and store the spare key
and key number tag in a safe place
away from the motorcycle.
A transponder is fitted within the
ignition keys to turn off the engine
immobiliser. To make sure the
immobiliser functions correctly, always
have only one of the ignition keys near
the ignition switch. Having two ignition
keys near the switch may interrupt the
signal between the transponder and the
engine immobiliser. In this situation the
engine immobiliser will remain active
until one of the ignition keys is removed.
Always get replacement keys from your
authorised Triumph dealer. Replacement
keys must be 'paired' with the
motorcycle’s immobiliser by your
authorised Triumph dealer.

Triumph Bonneville Bobber 2018 Specifications

General

Engine Displacement	1200 cc
Compression Ratio	10.0:1
Fuel System	Multipoint sequential electronic fuel injection
Clutch	Wet, multi-plate assist clutch
Transmission	6-speed
Frame	Tubular steel cradle
Front Tyre	100/90-19
Rear Tyre	150/80 R16
Seat Height	690 mm
Trail	90 mm
Dry Weight	228 kg
Engine Type	Liquid-cooled, 8 valve, SOHC, parallel twin
Bore x Stroke	97.6 mm x 80 mm
Power	76 HP (55 kW) @ 6, 100 rpm
Torque	106 Nm @ 4, 000 rpm
Final Drive	Chain
Swingarm	Twin-sided, steel
Front Wheel	19 x 2.5 in
Rear Wheel	16 in
Front Suspension	41mm forks
Front Brakes	Single 310 mm disc, 2-piston caliper
Rear Brakes	Single 255 mm disc, 2-piston caliper
Instrument Display and Functions	LCD multi-functional instrument pack with analogue speedometer, odometer, gear position indicator, fuel gauge, range to empty, service indicator, clock, trip computer, scroll and mode buttons on handlebar, cruise control, traction control status, heated grip ready, and throttle mode display
Wheelbase	1, 510mm
Tank Capacity	9.1 L (2.4 US gal)
Exhaust	Brushed 2-into-2 with twin slash cut silencers