EasyManuals Logo

Triumph Bonneville Bobber 2018 User Manual

Triumph Bonneville Bobber 2018
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
How to Ride the Motorcycle
61
To start the engine:
Check that the engine stop switch
is in the RUN position.
Make sure the transmission is in
neutral.
Turn the ignition switch on.
Note:
When the ignition is switched on,
the instrument warning lights will
illuminate and will then go off
(except those which normally
remain on until the engine starts -
see page 24).
Pull the clutch lever fully into the
handlebar.
Leaving the throttle fully closed,
push the starter button until the
engine starts.
The motorcycle is equipped with starter
lockout switches. The switches prevent
the electric starter from operating when
the transmission is not in neutral with
the side stand down.
If the side stand is extended whilst the
engine is running, and the transmission
is not in neutral then the engine will
stop regardless of the clutch lever
position.
Moving Off
To move the motorcycle:
Pull in the clutch lever and select
first gear.
Open the throttle a little and let out
the clutch lever slowly.
As the clutch starts to engage,
open the throttle a little more,
allowing enough engine speed to
avoid stalling.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Bonneville Bobber 2018 and is the answer not in the manual?

Triumph Bonneville Bobber 2018 Specifications

General IconGeneral
Engine Displacement1200 cc
Compression Ratio10.0:1
Fuel SystemMultipoint sequential electronic fuel injection
ClutchWet, multi-plate assist clutch
Transmission6-speed
FrameTubular steel cradle
Front Tyre100/90-19
Rear Tyre150/80 R16
Seat Height690 mm
Trail90 mm
Dry Weight228 kg
Engine TypeLiquid-cooled, 8 valve, SOHC, parallel twin
Bore x Stroke97.6 mm x 80 mm
Power76 HP (55 kW) @ 6, 100 rpm
Torque106 Nm @ 4, 000 rpm
Final DriveChain
SwingarmTwin-sided, steel
Front Wheel19 x 2.5 in
Rear Wheel16 in
Front Suspension41mm forks
Front BrakesSingle 310 mm disc, 2-piston caliper
Rear BrakesSingle 255 mm disc, 2-piston caliper
Instrument Display and FunctionsLCD multi-functional instrument pack with analogue speedometer, odometer, gear position indicator, fuel gauge, range to empty, service indicator, clock, trip computer, scroll and mode buttons on handlebar, cruise control, traction control status, heated grip ready, and throttle mode display
Wheelbase1, 510mm
Tank Capacity9.1 L (2.4 US gal)
ExhaustBrushed 2-into-2 with twin slash cut silencers

Related product manuals