MAINTENANCE
119
Rear Brake Fluid Level Inspection
and Adjustment
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult your authorized
Triumph dealer for advice before
riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause reduced brake
performance potentially leading to loss
of motorcycle control and an accident.
The reservoir is visible from the right
hand side of the motorcycle, forward of
the muffler, below the rider’s seat.
1. Rear brake fluid reservoir
2. Reservoir cap
3. Upper level line
4. Lower level line
To inspect the rear brake fluid level:
▼ Check the level of brake fluid visible
in the reservoir.
▼ The brake fluid level must be kept
between the upper and lower level
lines (reservoir held horizontal).
To adjust the rear brake fluid level:
▼ Loosen the reservoir cap and remove
the diaphragm seal.
▼ Fill the reservoir to the upper level
line using new DOT 4 brake fluid from
a sealed container.
▼ Re-install the reservoir cap making
sure that the diaphragm seal is
correctly installed.