Triumph Trident - Washing; After Washing

CLEANING AND STORAGE
148
Washing
To wash the motorcycle, do the
following:
▼ Make sure that the motorcycle
engine is cold.
▼ Prepare a mixture of clean, cold
water and mild automotive cleaner.
Do not use a highly alkaline soap as
commonly found at commercial car
washes because it leaves a residue.
▼ Wash the motorcycle with a sponge
or soft cloth. Do not use abrasive
scouring pads or steel wool. They will
damage the finish.
▼ Rinse the motorcycle thoroughly
with clean, cold water.
After Washing
Warning
Never wax or lubricate the brake discs.
Always clean the brake disc with a
proprietary brand of oil-free brake disc
cleaner.
Waxed or lubricated brake discs may
cause loss of braking power and an
accident.
After washing the motorcycle, do the
following:
▼ Remove the plastic bags and tape,
and clear the air intakes.
▼ Lubricate the pivots, bolts and nuts.
▼ Test the brakes before motorcycle
operation.
▼ Use a dry cloth or chamois leather to
absorb water residue. Do not allow
water to stand on the motorcycle as
this will lead to corrosion.
▼ Start the engine and run it for 5
minutes. Make sure that there is
adequate ventilation for the exhaust
fumes.