GENERAL INFORMATION
54
Trip Setup - Manual Reset
To set the trip meter to reset manually:
▼ From the Trip Setup menu, press the
Up and Down buttons to select
either Trip 1 Reset or Trip 2 Reset.
▼ Press the Right button to view the
available options.
▼ Select the required option and press
the Select button to confirm.
Reset now and cont.
Continue without reset
There are two options:
▼ Reset now and cont. - Resets all trip
meter data in the relevant trip meter.
▼ Continue without reset - Any trip
meter data in the relevant trip meter
will not be reset.
Trip Setup - Automatic Reset
To set the trip computer to
automatically reset:
▼ From the Trip Setup menu, press the
Up and Down buttons to select Trip 1
Reset or Trip 2 Reset.
▼ Press the Up and Down buttons to
select Automatic.
▼ Press the Right button to view the
available options.
▼ Press the Up and Down buttons to
select the timer setting required.
▼ Press the Select button to confirm. A
tick is shown to indicate the selected
option.
▼ The required time limit is then stored
in the trip memory.
▼ When the ignition is turned off, the
trip meter is set to zero when the
time period has elapsed.
1 Hour
2 Hours
4 Hours
12 Hours
8 Hours
The following table shows two examples
of the automatic trip reset functionality.
Ignition
Turned Off
Selected
Time Delay
Trip Meter
Resets to
Zero
10:30 hrs 4 Hours 14:30 hrs
18:00 hrs 16 Hours
10:00 hrs
(next day)
To Next Page
Loading...
