Trojan CONCEPT 200 - Assembly of the Butterfly Set

47
11485-8
ASSEMBLY STEPS
STEP 03 Assembly of the Butterfly Set
Note: Rubber Sticker (28) has been attached on the back of Connecting Part (11) to protect
Connecting Part (11) from Butterfly Arm (12,13).
s  !TTACHTHE#ONNECTING0ARTTO2IDGE4UBESECURETHEMWITHONEvXv"OLTTWOvXMM
Washers (65), two Brass Colour Bushings (71) and two 1/2” Nuts (62).
s  4HENATTACH"UTTERmY!RMSECURINGTHEMWITHFOUR"RASS#OLOUR"USHINGSTWOvXv"OLTS
four 1/2” x 26mm Washers (65) and two 1/2” Nuts (62).
Note:
The Grip of the two Butterfly Arms (47) and two Arm foam Rollers (19) have been attached on the
Butterfly Arms (12,13).