31
40
40
79
74
74
58
63
73
104
40
40
58
63
104
79
74
73
74
96
16
73
58
Rod
79
58
79
73
16
96
Rod
ASSEMBLY STEPS
STEP 29:
1. Wrap the High Cable (73) under a 90 mm Pulley
(58). Attach the 90mm Pulley, a Plastic Cable
Trap (63), and two Half Guards (40) to the two
90 mm Pulley Plates (74) with an M10 x 50 mm
Bolt (104) and an M10 Locknut (79).
2. Make sure that the Plastic Cable Trap is oriented
to hold the High Cable in the groove of the
90 mm Pulley.
STEP 30:
1. Wrap the High Cable (73) over a 90 mm Pulley
(58) and over the indicated rod in the Top
Frame (16).
2. Attach the 90 mm Pulley to the Top Frame with
an M10 x 45 mm Bolt (96) and an M10 Locknut
(79).
STEP 30
STEP 29
REAR OF THE WEIGHT RACK
REAR OF THE WEIGHT RACK
#21M05T035 Multifunction Smith Machine UM A4.indd 31 2021/06/24 11:27 AM
To Next Page
Loading...
