40
58
79
40
40
54
1
96
79
59
84
54
103
62
102
2
ASSEMBLY STEPS
STEP 47:
1. Route the Long Cable (54) around a 115 mm
Pulley (59).
2. Attach the 115 mm Pulley, a Long Metal Cable
Trap (62), an M10 Washer (84), and a Large Full
Guard (103) to the Centre Base (2) with an
M10 x 75 mm Button Bolt (102) and an M10
Locknut (79).
Make sure that the Long Metal Cable Trap
is oriented to hold the Long Cable in the
groove of the 115 mm Pulley.
STEP 48:
1. Route the Long Cable (54) under a 90 mm
Pulley (58).
2. Attach the 90 mm Pulley and two Half Guards
(40) to the right Base (1) with an M10 x 45 mm
Bolt (96) and an M10 Locknut (79).
STEP 48
STEP 47
REAR OF THE WEIGHT RACK
REAR OF THE WEIGHT RACK
79
79
58
59
54
54
62
84
103
102
40
40
1
2
96
#21M05T035 Multifunction Smith Machine UM A4.indd 40 2021/06/24 11:28 AM
To Next Page
Loading...
