22
CONSOLE FUNCTIONS
Once the unit has been powered on, the quick start mode can be accessed by pressing the start/stop button.
QUICK START
MANUAL MODE
In the standby state, press the Mode button to enter the M setting interface. Confirm the mode by pressing
the Confirm button.
Manually set the time by using the plus or minus keys, once the desired time has been selected, confirm the
time by pressing the Confirm button.
Press the confirm button again to enter the distance data required, the plus or minus keys will increase or
decrease the desired distance. Confirm the distance by pressing the confirm button.
Press the confirm button again to enter the calorie data required, the plus or minus keys will increase or
decrease the desired calories. Confirm the calories by pressing the confirm button.
After all data has been set, press the Start/Stop button to start the meter count and workout.
AUTOMATIC PROGRAM MODE
In the standby state, press the Mode button to enter the setting interface. Select the Automatic program
mode you require P1-P3. Press the Confirm button to enter the automatic program parameter setting interface.
Time will be displayed, to set the time use the plus or minus keys, after the time setting is compete press the
confirm button.
Press the confirm button again to enter the distance data setting interface, the distance can be set by using
the plus or minus keys. After the distance setting is complete press the confirm button.
Press the confirm button again to enter the calorie data setting interface, the calories can be set by using the
plus or minus keys. After the calorie setting is complete press the confirm button.
After all data has been set, press the Start/Stop button to start the meter count and workout.
LED WINDOW DISPLAYS
Time window: displays movement time, forward timing from 0:00-99:59, time to 99:59 after the zero
continue to run.
To Next Page
Loading...
