21
CONSOLE FUNCTIONS
WINDOW AND BUTTON FUNCTIONS
Start / Stop button: In the standby state, press the button to start the meter count. In the running state,
press the button to enter the paused state. In the paused state, press the button to start again or press
and hold the button to clear data and return to standby state.
FUNCTIONS
Mode button: In the standby state, press the mode button to select the mode you require P1-P3
Confirm button: In the manual mode and program selection interface, this button is used to confirm the
exercise mode. In the exercise mode this button is used to confirm the time, distance, and calories settings.
+ / - buttons on handlebars: These buttons are used to increase and decrease the resistance in the running
state, the parameters will adjust accordingly on the console screen.
/ buttons on handlebars: These buttons are used to adjust the incline value in the running state. The
parameters will adjust accordingly on the console screen.
To Next Page
Loading...
