Trojan PRO Series - Display Range of Each Value; Incline Calibration

25
CONSOLE FUNCTIONS
The speed is calculated as 21.5KM/H for 60RPM. When there is no speed signal, the distance does not count.
ALGORITHM LIST
In the running state, if there is no speed signal within 1 minute, the system automatically enters the suspended
state. In the stopped or suspended state, the system enters the hibernated state without any operation for 10
minutes.
SLEEP AND AUTOMATIC STOP FUNCTION
The system can be turned off at any time by turning off the power switch without damaging the system.
SHUTDOWN
In the standby state, hold down the incline buttons / for 3 seconds at the same time, the system will enter
the automatic incline calibration.
When calibration is complete, the system will exit automatically.
If error E04 is displayed on the console, check the motor, motor signal cable, or replace the driver.
INCLINE CALIBRATION
DISPLAY RANGE OF EACH VALUE