Trojan STAMINA 310 - Assembly Steps; Step 01: Uprights and Handrails; Step 02: Control Wire and Console

10107M-6
4. ASSEMBLY STEPS
STEP 01
- Unfold the Left and Right Uprights on the
Main Frame until they are in the upright
position.
- Secure the Left and Right Upright with
Allen Bolts (a&b).
- Raise the Handrails until they are horizontal,
then secure them with Allen Bolts (a).
STEP 02
- Connect the Control Wire in the Right
Upright (1) with the Computer Control Wire
(2)
- Attach the computer onto the Left and Right
Handrail , securing the them with Allen Bolts (b)
Two persons are
required to assemble the
Trojan Stamina 310.