50
Chapter 12: Electrical System 2902 Walkaround • Owner’s Manual Supplement
Connecting To Shore Power
1. Review all hazard infor-
mation at the beginning
of this section,
Shore Power.
2. Turn Off all breakers and
switches on the AC
master panel.
3. Attach the shore power
cord to the boat inlet
first, then to the
dockside outlet.
4. Turn On the master
breaker(s) and individ-
ual component breakers
as required.
SHOCK & ELECTRICAL SYSTEM DAMAGE HAZARD!
• Monitor the polarity indicator lights EVERY TIME you connect to shore power.
• If a reversed polarity light turns On when you are connecting to shore power, DO NOT turn
On the main breaker switches.
• Instead, IMMEDIATELY unplug the shore power cord (ALWAYS from the dockside outlet
first) and alert marina management.
WARNING!
!
TYPICAL SHORE
POWER INLET
SHORE POWER INLET
To Next Page
Loading...
