Trophy 1802 User Manual

Contact your dealer for service, explanations, and support on your new boat.

Details on the Trophy Limited Warranty and how to obtain a copy if missing.

Advice on gaining handling experience and recommended safety classes.

Crucial safety standards and hazard information for operating the boat safely.

Guidance on engine/accessory installation, modifications, and warranty implications.

Requirement for certified personnel to perform maintenance on boat systems.

Tips for hull maintenance, preventing marine growth, and bottom paint recommendations.

Critical information on CO hazards, symptoms, prevention, and alarm systems.

Contact details for USCG, NMMA, and ABYC for further boating safety information.

Key specifications including dimensions, draft, and capacity for each Trophy model.

Diagrams illustrating hull component locations for 1802, 2002, 2052, 2302, 2352, and 2502 models.

Diagrams showing deck component layouts for 1802, 2002, 2052, 2302, 2352, and 2502 models.

Illustrations of hard top and extended hard top installations and features.

Diagrams of helm layouts and control placements for 1802, 2002/2052, 2302/2352, and 2502 models.

Detailed identification and locations of various boat systems and parts.

General guidance on engine operation, maintenance, and manufacturer's instructions.

Information on the engine room ventilation system for removing explosive fuel fumes.

Details on fuel system components: fill, vent, pickup tube, and fuel filters.

Diagrams illustrating fuel system routing and connections for different boat models.

Step-by-step instructions for draining engine oil using the quick oil drain system.

Information on rotary, rack-and-pinion, and manual hydraulic steering systems.

Guidelines and warnings for operating the boat's shift and throttle controls.

Explanation of the outboard motor's power trim and tilt system features.

Instructions and safety warnings for operating and adjusting trim tabs.

Information on VHF radio features, capabilities for weather reports and communication.

Guidance on compass accuracy, calibration, and the use of deviation cards.

Details on bilge pump systems, including testing, autofloat switches, and maintenance.

Explanation and testing procedures for automatic bilge pump float switches.

Operation, maintenance, and winterization of the boat's freshwater system.

Guidelines for proper use, maintenance, and winterization of the portable toilet.

Instructions for using and winterizing the marine head system, including holding tank.

Overview of seawater intake systems (head, baitwell) and seacock operation.

Instructions for filling, using, and draining baitwell systems and washdowns.

Operating instructions for the raw water washdown system.

Information on deck drains and fish well drain systems, including sump pump use.

Information on cleats, tow eyes, and precautions related to towing.

Instructions for installing, using, securing, and stowing canvas tops.

Safety precautions, operation, and ventilation requirements for the alcohol stove.

Notes on audio equipment operation and potential interference from engines.

Instructions for converting dinette seating areas into berths for various models.

Guidance on light maintenance, battery conservation, and navigation light visibility.

Overview of the DC system, batteries, fuses, circuit breakers, and battery switches.

Information on the engine alternator and optional battery charger systems.

Details on the helm's 12-volt accessory outlet, its rating, and usage.

Explanation of the AC system, shore power, and panel for the 2502 model.

Safety procedures, warnings, and guidelines for connecting to shore power.

Diagrams showing deck electrical harness layouts for various boat models.

Diagrams illustrating hull electrical harness routing for different boat models.

Illustrations of battery system connections and wiring for various boat models.

Detailed electrical wiring diagrams for the 1802, 2002, 2052, 2302, 2352, and 2502 models.

Space to record details of the selling dealership, sales manager, and service manager.

Fields for recording engine and propeller make, model, serial numbers, and oil type.

Areas for logging electronics manufacturer, model, serial numbers, and other key data.

Sections for detailing the boat's registration, features, and primary operator's information.

Information fields for passengers, including name, age, health status, and phone number.

Checklists for survival equipment and details of trip plans, including stopovers.