79
Walkaround Models • Owner’s Manual Supplement Chapter 12: Electrical System
Connecting To Shore Power
1. Review all of the
hazard information
at the beginning
of this section,
Shore Power.
2. Turn Off all of the
breakers and
switches on the AC
master panel.
3. Attach the shore
power cord to
the boat inlet first,
and then to the dock-
side outlet.
4. Turn On the master
breaker(s) and indi-
vidual component
breakers as required.
SHOCK & ELECTRICAL SYSTEM DAMAGE HAZARD!
• Monitor the polarity indicator lights EVERY TIME you connect to shore power.
• If a reversed polarity light turns On when you are connecting to shore power, DO NOT turn
on the main breaker switches.
• Instead, IMMEDIATELY unplug the shore power cord (ALWAYS from the dockside outlet
first) and alert marina management.
WARNING!
!
TYPICAL SHORE
POWER INLET
To Next Page
Loading...
