62
Chapter 7: Plumbing Walkaround Models • Owner’s Manual Supplement
Raw Water Washdown (If Equipped)
1. Turn the baitwell & washdown y-valve clockwise to the washdown position.
2. Open the seawater intake seacock.
3. On the main switch panel, turn On the baitwell pump switch.
FLOODING & SWAMPING HAZARD!
• While the raw water system is pressurized, NEVER leave the boat unattended for any length
of time.
• Any leak or break in the system could allow large amounts of water to pump into the bilge,
swamping the batteries and engine, and possibly sinking the boat.
• Close the seacock whenever the raw water system or baitwell system is not in use.
WARNING!
!
To Next Page
Loading...
